Incidence and Characteristics of Knee Ligament and Meniscal Injuries in Patients With Posterolateral Tibial Plateau Fractures.

Background: Anterior cruciate ligament (ACL) tears are commonly seen with concomitant injuries to the posterolateral tibial plateau, while the occurrence of ACL injuries in posterolateral tibial plateau fractures (PTPFs) remains unclear. Purpose: To (1) explore the incidence of knee ligament (anterior or posterior cruciate ligament, medial or lateral collateral ligament) and medial or lateral meniscus injuries in patients with PTPF and (2) find reliable PTPF-related parameters to predict the risk of knee ligament and meniscal injuries. Study Design: Cross-sectional study; Level of evidence, 3. Methods: Patients diagnosed with PTPF who had computed tomography and magnetic resonance imaging (MRI) data were identified. Morphological parameters of the PTPF were measured on sagittal computed tomography images. Knee ligament and meniscal injuries were assessed using MRI. The association of ACL injuries with meniscal injuries was analyzed. Receiver operating characteristic (ROC) analysis was used to determine the value and cutoff point of the PTPF morphological parameters for diagnosing complete in-substance ACL tears. Results: Overall, 113 patients with PTPF were included. ACL injuries were present in 94 (83.2%) patients, including 43 (38.1%) avulsion fractures and 28 (24.8%) complete in-substance tears. Patients with in-substance ACL tears had a higher incidence of lateral meniscus posterior horn tears compared with the other patients (PBonferroni < .001). ROC analysis revealed that both the fracture depression angle (cutoff point, 25.5°) and the posterior articular surface loss percentage (cutoff point, 37.5%) had a sensitivity >90% and a specificity >80% for the diagnosis of complete in-substance ACL tears. Conclusion: ACL injuries were seen in 83.2% of the study patients. Complete in-substance ACL tears were associated with an increased incidence of lateral meniscus posterior horn tears. Among PTPF parameters, fracture depression angle and posterior articular surface loss percentage showed a high predictive value for the presence of complete in-substance ACL tears, thereby reducing delays in diagnosis and treatment.

Effectiveness of blood flow restriction versus traditional weight-bearing training in rehabilitation of knee osteoarthritis patients with MASLD: a multicenter randomized controlled trial.

To compare the reliability and effectiveness of blood blow restriction resistance training (BFR) versus traditional weight-bearing training (WB) in knee osteoarthritis (KOA) patients with metabolic dysfunction-associated steatotic liver disease (MASLD). Methods: This multicenter randomized controlled trial was conducted from January 2021 to June 2022 at Shanghai Jiao Tong University affiliated Sixth People's Hospital and The People's Hospital of Mengla County. A total of 120 outpatients were recruited and randomized to perform WB (n=60) or BFR (n=60) resistance training protocols in accordance with standard recommended protocols for 12 weeks. Demographic data and Kellgren and Lawrence grading system scores were collected. Pain, range of motion (ROM), scaled maximal isotonic strength (10RM), self-reported function (KOOS), and 30-s chair sit-to-stand test results were assessed at weeks 1, 4, and 12. Results: 112 patients (57 in the WB group, 55 in the BFR group) completed the training programs and assessments. No significant intergroup demographic differences were noted. ROM and scaled 10RM significantly increased at the 4- and 12-week assessments and differed significantly between groups. The pain, ability of daily living and quality of life subscale in KOOS increased significantly at the 12-week assessment and differed significantly between groups, adjusted for baseline value. Significant and comparable increases in 30-s chair sit-to-stand test results were observed within and between study groups. Conclusion: BFR training enhanced muscle strength, reduced pain, and improved daily living and sports activities in patients with KOA, compared to WB training alone. BFR should be recommended for rehabilitation in KOA individuals with MASLD. Clinical trial registration number: ChiCTR2100042872.

Biomechanical study of a new rim plate fixation strategy for two kinds of posterolateral depression patterns of tibial plateau fractures: a finite element analysis.

PURPOSE: The biomechanical capacity of "Barrel Hoop Plate (BHP)" in the treatment of the posterolateral tibial plateau (PL) depression fractures remains unknown. In this study, two kinds of posterolateral tibial plateau depression models involving mild slope-type depression fracture (MSDF) and local sink hole-type depression fracture (LSDF) were created to test and compare the biomechanical capacities of BHP with the other two conventional fixations (Anterolateral Plate and Posterolateral Plate, ALP and PLP) by finite element analysis. METHODS: The 3D models of three kinds of plate-screw systems and the two kinds of PL-depression models (MSDF and LSDF) were created. An axial force of 400N was applied from the distal femur to the tibial plateau. The maximal displacements of the posterolateral fractures (PLFs), the distribution on the PLFs articular surface and key points displacements were measured. Stresses in the fixation complex including the maximal Equivalent (von-Mises) Stress of implants, the max shear stress of PLFs and stiffness of the fixation were calculated. RESULTS: The maximal displacement of MSDF was least in Group BHP. The maximal displacement of LSDF was least in Group ALP. In MSDF, BHP showed the best rim fix effect in MSDF, but unsatisfactory results in LSDF. In both MSDF and LSDF, the greatest max Equivalent Stress of the plate and the screw occurred in the PLP system. ALP and BHP showed a comparable stiffness in MSDF and ALP had the strongest stiffness in the fixation of LSDF. CONCLUSIONS: In MSDF, the BHP has the best biomechanical capacity, especially in displacements of key points such as the PL rim, fracture line, and depression center. In LSDF, the ALP system shows the best biomechanical effect. Although the PLP has the best fixation effect on the posterior wall, it is not suitable for PL-depression fracture fixation.

Editorial Commentary: High Tibial Osteotomy Lateral Hinge Fracture Is More Common in Patients With Posterolateral Tibial Condylar Protrusion.

The most common adverse event during opening-wedge high tibial osteotomy is lateral hinge fracture. It may be caused by a variety of factors, including an insufficient osteotomy, a large opening gap, an inappropriate hinge position, and early weight bearing with compromised fixation. In addition, particularly in men, posterolateral protrusion of the proximal tibial condyle often results in an insufficient posterior cortical osteotomy owing to surgical overprotection in an effort to avoid popliteal vessel injury. An insufficient posterolateral osteotomy shifts the hinge point posteriorly, resulting in an unstable hinge fracture during opening of the osteotomy wedge, as well as undesirable changes in the mechanical axis. A solution in patients with a large posterolateral proximal tibial condyle could be to shift the osteotomy slightly distally. Surgeons should be mindful of individual proximal tibial morphology in the area of the lateral hinge.

Multi-planar fixation of displaced, multi-fragmentary patella fractures in elderly patients with anterior locking plates and cerclage wires: preliminary results.

PURPOSE: The purpose of this study was to evaluate the outcomes of displaced, multi-fragmentary patella fractures in elderly patients treated with anterior plating and cerclage wires. PATIENTS AND METHODS: Between 2018 and 2020, patients aged at least 60 years old undergoing anterior plating and circumferential wiring for displaced, multi-fragmentary patella fractures with a minimum of 12 months follow-up were included. Fragments were reduced and circumferentially stabilized by loop wires, followed by multi-planar fixation with an anterior locking plate and multi-directional screws. Postoperative outcomes were evaluated with the Böstman scores and range of motion. Patients were also asked about symptomatic hardware as well as satisfaction with postoperative outcomes. RESULTS: Sixteen patients with an average age of 71.8 ± 9.3 years old were followed up for an average follow-up was 25.1 ± 8.2 months. At the latest follow-up, the average Böstman scores were 27.2 ± 3.4, and active knee flexion was 123 ± 14°. Two patients complained pinpoint implant irritation and underwent implant removal. Another underwent implant removal due to cultural reasons. Fifteen patients were satisfied with the operative outcomes, and one was unsatisfied due to intermittent patellofemoral pain. Cerclage wire breakage was noted in nine patients on postoperative radiographs, but none elicited pinpoint pain. No wound complications, infections, nonunion or loss of reduction were observed. CONCLUSIONS: Anterior locking plates and cerclage wires in tandem provide reliable multi-planar fixation for displaced, multi-fragmentary patellar fractures in elderly patients and resulted in favorable clinical outcomes.

Clinical outcomes and affecting factors of ipsilateral femoral neck and shaft fractures - Multination, multicenter analysis.

BACKGROUND: This study aimed to evaluate the clinical outcomes of ipsilateral femoral neck and shaft fractures and identify the risk factors associated with missed diagnosis of femoral neck fractures and clinical outcomes of this fracture. METHODS: The ipsilateral femoral neck and shaft fractures from seven centers were retrospectively reviewed. Data on injury mechanism, fracture pattern, and fracture classification; surgical factors including fixation method; and timing of detection of femoral neck fracture were analyzed. The clinical outcomes, complications, and the incidence of avascular necrosis of the femoral head (AVNFH) were reviewed. Risk factors for missed femoral neck fracture and complications were analyzed. RESULTS: In total, 74 patients with an average age of 43.6 years were included. Of the femoral shaft fractures, 56.8% were type A, 21.6% were type B, and 21.6% were type C. Sixteen patients had an open fracture of the femoral shaft. Femoral neck fracture was initially missed in 27% patients and the timing of delayed diagnosis was at an average of 11.1 days after injury. For detecting femoral neck fractures, minimal displacement of the femoral neck fracture was a risk factor, whereas computed tomography (CT) was a protective factor. The incidence of AVNFH was 6.8% at an average of 36.8 months after injury. The AVNFH group had more displaced femoral neck fractures at the time of surgery, but there was no difference in the timing of diagnosis compared to non-AVNFH group. The femoral shaft showed considerable healing problems, with an average union time of 29.7 weeks and a 20.2% nonunion rate. CONCLUSION: Ipsilateral femoral neck and shaft fractures had a high rate of missed diagnosis, especially in minimally displaced fractures; however, CT was a protective factor. AVNFH occurred in 6.8% and was related to femoral neck fracture displacement, but not delayed diagnosis. The femur nonunion rate was high, which warrants attention.

Combined Proximal Tibial Osteotomy for Adult Kashin-Beck Disease with Severe Varus Knee Osteoarthritis: Case Report and Literature Review.

BACKGROUND: Kashin-Beck disease (KBD) is an endemic, chronic osteoarthropathy that seriously affects joint function and can lead to severe knee deformity. Osteotomy is considered to be one of the effective methods for the treatment of this disease. Therefore, we designed a novel type of osteotomy named combined proximal tibial osteotomy (CPTO), which combines the characteristics of opening-wedge high tibial osteotomy and tibial condylar valgus osteotomy. CASE PRESENTATION: We report the case of a 48-year-old male with knee pain and varus deformity who was diagnosed with KBD and varus knee osteoarthritis (Kellgren-Lawrence stage IV). Considering the patient's relatively young age, a varus deformity of the right knee of 16.79°, and an intra-articular instability, we performed a CPTO treatment. In this procedure, we performed an L-shaped osteotomy from the medial edge of the proximal tibia to the intercondylar eminence and an osteotomy from the medial side of the proximal tibia to the lateral side through the same incision, to adjust the leg alignment and the congruity of the joint by valgus correction. At 29 months follow-up, this patient achieved satisfactory results, with a varus right knee of 2.87°. There was significant improvement in his right knee function, pain, and joint stability. CONCLUSIONS: CPTO may be an acceptable treatment for KBD patients with severe knee varus deformity and intra-articular instability. It can be considered as an alternative treatment, especially for patients with advanced osteoarthritis needing knee preservation.

Ability of modern proximal tibial lateral plates to capture posterolateral tibial plateau fracture fragments.

Background: The surgical treatment of posterolateral tibial plateau fractures involves a challenging and diverse set of considerations, one of which is the lack of proper and satisfactory internal fixations to purchase posterolateral fragments. Evaluating the configuration of internal fixations is often overlooked, despite it being important to outcomes of fracture fixation. This study aimed to (I) propose a new digital methodology of internal fixation evaluation that based on actual fracture cases and (II) evaluate the fixation effectiveness of four commercially available proximal tibial lateral plate-screw constructs for posterolateral fragments. Methods: Tibial plateau fractures involving the posterolateral column were retrospectively reviewed. The reconstructed three-dimensional (3D) fracture models were virtually reduced, and targeted internal fixations were modeled digitally in specialized software. Four implants from three manufacturers (DePuy Synthes, Westchester, NY, USA; Zimmer, Warsaw, IN, USA; and Biomet, Warsaw, IN, USA) were placed on each fracture in an optimal position to simulate surgical fixation and quantitatively evaluate fixation effectiveness. The fragment was considered to be "captured" if it was purchased by at least two screws. The 3D fracture maps and heat maps were created by graphically superimposing all uncaptured fracture fragments onto a tibia template. Results: This study included 144 posterolateral tibial plateau fractures. When not using screws in a variable angle (VA) manner, the fixation effectiveness for posterolateral fragments was 58.3% for the DePuy Synthes locking compression plates (LCP), 47.9% for the DePuy Synthes VA-LCP, 50.7% for the Zimmer plate, and 43.8% for the Biomet plate. In contrast, the capturing rates boosted to 76.4% and 71.5% when utilizing VA screws in the DePuy Synthes VA-LCP and the Biomet plate. The high-frequency uncaptured areas tended to concentrate on the rim of the posterolateral wall and were mainly distributed in the posterior 1/2 to 3/4 of the parallel position of the fibula head. Conclusions: The proposed new digital methodology was demonstrated feasible and may improve the quantitative evaluation of the implants and optimize the design of implants. The commercially available proximal tibial lateral plate-screw constructs were insufficient in capturing posterolateral fragments, and design-improved or additional implants may be necessitated.

Three-dimensional computed tomography mapping and analysis of distal femur fractures (AO/OTA types 33A, 33B, and 33C).

Background: Distal femur fractures are complex injuries with a high rate of fracture healing problems. Since the widespread of computed tomographic imaging in the diagnosis of distal femur fractures, many fracture characteristics have been discovered. This study aimed to depict the location and frequency of distal femur fracture lines and further analyze the morphological characteristics using the 3-dimensional computed tomography (CT) mapping technique, thus providing more information to solve this challenging clinical problem. Methods: In total, 217 distal femur fractures in 216 patients were retrospectively reviewed. Fracture fragments on CT were digitally reconstructed and virtually reduced to match a template model. The contour of every fracture fragment was then marked with smooth curves, and the overlap of all fracture lines allowed for the creation of 3-dimensional fracture maps and heat maps. Fracture characteristics were summarized based on these maps. Results: This study included 114 left knee injuries, 101 right knee injuries, and 1 case with bilateral injury. Distal femur fractures were most likely to occur among patients aged 61 to 70 years. On the heat map of all 217 fractures, fracture line hot zones were mainly concentrated around the metaphysis, the lateral part of the intercondylar notch, and the patellofemoral joint. Distal femur fractures with three Arbeitsgemeinschaft für Osteosynthesefragen Foundation/Orthopaedic Trauma Association (AO/OTA) types demonstrated distinct fracture characteristics. In total, there were 58 coronal plane fractures (41.1%) in 141 intercondylar fractures. Conclusions: The intercondylar fracture patterns in AO/OTA type B and type C fractures were similar, while the supracondylar characteristics in AO/OTA type A and type C were different. The findings in this study can help orthopaedic surgeons better understand the fracture morphology on the basis of AO/OTA classification. Further studies are needed to establish a standard biomechanical fracture model and new fixation strategy for better clinical outcomes.

Biomechanical evaluation of combined proximal tibial osteotomy for varus knee osteoarthritis implanted novel designed plate system: Finite element analysis.

BACKGROUND: Combined proximal tibial osteotomy (CPTO) is an innovative and effective procedure for correcting varus knee osteoarthritis (VKOA) with intra- and extra-articular deformity. Here, we designed a novel internal fixation plate system for CPTO and assessed the biomechanical strength of the bone-implant. METHODS: Our newly designed CPTO internal fixation plate system included a specialized plate shape, combination holes, locking screw holes, screw position, and size of fixation. The biomechanical performance of this plate system in CPTO treatment was compared via finite element analysis (FEA) to traditional Tomofix devices implanted in the opening-wedge high tibial osteotomy (OWHTO), tibial condylar valgus osteotomy (TCVO), and CPTO. RESULTS: The tibial wedge stiffness and displacement after CPTO implantation of the novel internal plate fixation increased by 9.6%, which was -65% higher than the CPTO with the Tomofix system. The average stress of the bone, plate, and screws in the CPTO implanted the novel designed plate system compared to the Tomofix system decreased by 12.7%, 1.9%, and 20.3 %, respectively. The device maximum stress and wedge stiffness after CPTO with the novel plate system versus traditional OWHTO and TCVO with the Tomofix system were 255.7 MPa, 204 MPa, 130.4 MPa, and 678.9 N/mm, 660.3 N/mm, 1626.0 N/mm, respectively. CONCLUSIONS: The novel internal fixation plate system usage during CPTO exhibited similar bone-implant biomechanical strength, compared to OWHTO, but with enhanced construct stability.

Efficacy of leg swing versus quadriceps strengthening exercise among patients with knee osteoarthritis: study protocol for a randomized controlled trial.

BACKGROUND: Knee osteoarthritis (OA) is a leading cause of global disability. According to current guidelines, exercise is the most recommended and important non-surgical treatment for knee OA. However, the best type of exercise for this condition remains unclear. Evidence has shown that traditional Chinese exercises may be more effective. Therefore, the current prospective, two-armed, single-center randomized controlled trial (RCT) aimed to identify an effective physiotherapy for knee OA. METHODS/DESIGN: In total, 114 patients with painful knee OA will be recruited from the orthopedic outpatient department of Shanghai Jiao Tong University Affiliated Sixth People's Hospital. To compare the therapeutic effect of two different home-based exercise programs, the participants will be randomly assigned into the experimental group (leg swing exercise) or the control group (quadriceps strengthening exercise). Each participant in both groups will be required to attend five individual sessions with a physiotherapist who will teach the exercise program and monitor progress. Participants will be instructed to perform the exercises at home every day for 12 weeks. Clinical outcomes will be assessed at baseline and 12 and 24 weeks after starting the intervention. The primary outcomes are average overall knee pain and physical function in daily life. The secondary outcomes include other measures of knee pain, physical function, patient-perceived satisfactory improvement, health-related quality of life, physical activity and performance, muscle strength of the lower limb, and adherence. DISCUSSION: This study will provide more evidence on the effects of traditional Chinese exercise on improving physical function and relieving joint pain among patients with knee OA. If proven effective, leg swing exercise can be used as a non-surgical treatment for knee OA in the future. TRIAL REGISTRATION: Chinese Clinical Trial Registry ChiCTR2000039005 . Registered on 13 October 2020.

[Research progress of osteotomy around knee in the treatment of valgus knee osteoarthritis].

OBJECTIVE: To review the research progress of surgical methods of osteotomy around the knee in the treatment of valgus knee osteoarthritis. METHODS: The relevant literature on the surgical treatment of valgus knee osteoarthritis at home and abroad in recent years was reviewed, and the advantages, disadvantages, and effectiveness of different surgical methods of osteotomy around the knee were summarized. RESULTS: For young and active patients with symptomatic valgus knee osteoarthritis, osteotomy around the knee is a safe and reliable treatment option. At present, the main surgical methods include medial closing wedge distal femoral osteotomy, lateral opening wedge distal femoral osteotomy, medial closing wedge high tibial osteotomy, and lateral opening wedge high tibial osteotomy. The indications, advantages, and disadvantages of different osteotomies are different, and the selection of appropriate surgical method is the key to achieve good effectiveness. CONCLUSION: There are many osteotomies in the treatment of valgus knee osteoarthritis. In order to achieve good results, improve survival rate, and reduce postoperative complications, the most reasonable surgical strategy needs to be developed according to different situations.

A novel Patient-Specific Three-Dimensional Printing Template Based on External Fixation for Pelvic Screw Insertion.

PURPOSE: To investigate the clinical effect of novel patient-specific 3D printing templates based on external fixation for pelvic screw insertion compared with the fluoro-navigation technique. MATERIALS AND METHODS: We retrospectively studied 18 pelvic fracture patients from July 2017 to July 2018. For analysis, patients were divided into two groups: the template group (15 screws in 8 patients) and the fluoro-navigation group (22 screws in 10 patients). The screw insertion time, radiation exposure time, and accuracy of the screw insertion as evaluated by postoperative CT scans were analyzed. RESULTS: In the template group, the average screw insertion time (11.5 ± 2.3 min/screw) was significantly 50.6% less than that in the fluoro-navigation group (23.3 ± 3.1 min/screw; P < 0.05). The average time of X-ray exposure in the template group (11.5 ± 3.9 s/screw) was also significantly 39.8% less than in the fluoro-navigation group (19.1 ± 2.5 s/screw; P < 0.05). In the template group, the mean deviation distance and angle between the actual and planned screw position was 2.6 ± 0.2 mm and 2 ± 0.3°. CONCLUSIONS: The patient-specific template based on external fixation can guide the insertion of the pelvic screw accurately and safely while significantly reducing operation and radiation exposure time.

Three-dimensional fracture mapping of multi-fragmentary patella fractures (AO/OTA 34C3).

BACKGROUND: Multi-fragmentary patella fractures (MFPFs) are common patella fracture type. Low-profile plate fixation seems to be promising advancement in the treatment of such difficult fractures. There is no systematic morphologic study specifically for MFPFs to provide objective reference for the improvement of future implants and biomechanical models. This study aimed to delineate and quantify the location and spatial frequency of fracture lines, comminution zones, and coronal plane fragments in MFPFs using three-dimensional (3D) CT mapping technique. METHODS: A total of 187 MFPFs were retrospectively reviewed and analyzed. Fractures were digitally reconstructed from CT data, and fracture lines, comminution zones, and coronal fragments were graphically overlaid onto a 3D patella template. Fracture characteristics were summarized qualitatively based on the fracture maps and quantitatively on the counts and volume of each fragment. Furthermore, according to the classic fracture patterns concerning MFPFs, subgroup analysis was conducted. RESULTS: On average, we observed 7 fragments in each fracture, 3 of which were <1 cm3. Most fractures (81.2%) had coronal fragments on the anterior and/or posterior patella surfaces. We identified three classic patella fracture patterns: transverse with comminution, stellate, and "displaced comminuted" in 104, 54, and 29 knees, respectively. 3D maps demonstrated distinct distribution fracture patterns of fracture lines, comminution zones, and coronal fragments. CONCLUSIONS: Supero-medial corner of the patella was seldomly involved, and might be used as the cornerstone for fixation. Coronal fragments were common on both anterior and posterior patella surfaces, justifying the application of anterior plate osteosynthesis characterized by multi-planar fixation. Comminution areas mainly concentrated in the lower half of the patella, potentially suitable for an implant in combination with sutures or circumferential cerclage wiring. The described 3D features of MFPFs could provide reference for the design of future implants and biomechanical models.

MiRNA-132 regulates the development of osteoarthritis in correlation with the modulation of PTEN/PI3K/AKT signaling.

BACKGROUND: Osteoarthritis (OA) is a commonly known prevalent joint disease, with limited therapeutic methods. This study aimed to investigate the functions of miRNA-132 (miR-132) in the modulation of PTEN/PI3K/AKT signaling pathway in the development and progression of osteoarthritis. METHODS: Eight male osteoarthritic patients and eight healthy males were recruited. Male Sprague Dawley (SD) rats were used for cellular experiments. QRT-PCR was performed to detect the expression levels of miR-132, PTEN, PI3K and AKT. MTT assay and apoptosis assay were carried out to measure the cell proliferation rate and cell apoptosis rate, respectively. Western blotting was employed to detect the protein expression of related RNAs and inflammatory factors. RESULTS: In osteoarthritic patients, the expression level of miR-132 was decreased, compared with that in the normal group. Over-expression of miR-132 elevated cell proliferation and decreased apoptosis of chondrocytes. Down-regulation of miR-132 decreased cell proliferation and induced apoptosis in chondrocytes. In addition, down-regulation of miR-132 promoted the expression of Bax protein and activated caspase-3/9, increased inflammation divisors. PTEN inhibitor antagonized the destructive effect of the miR-132 inhibitor on cell proliferation of chondrocytes. PI3K inhibitor increased the destructive effect of the miR-132 inhibitor on osteoarthritis. CONCLUSION: In conclusion, miR-132 is an important regulator of osteoarthritis in chondrocytes through the PTEN/PI3K/AKT signaling pathway.

Biomechanical evaluation of different types of lateral hinge fractures in medial opening wedge high tibial osteotomy.

BACKGROUND: Lateral hinge fractures are common complications in the medial opening wedge high tibial osteotomy for treatment of knee osteoarthritis. The rehabilitation protocols are decided depending on the remaining stability following these fractures. This study aimed to evaluate the biomechanical properties of different types of lateral hinge fractures in medial opening wedge high tibial osteotomy. METHODS: Twenty synthetic tibia models were used as test samples. A 10-mm bone wedge was removed from the medial side of the proximal tibias to create the bone defect. The samples were then divided into 4 groups: (1) intact lateral hinge; (2) Takeuchi type I fractures; (3) type II fractures; and (4) type III fractures. After fixation with a locking plate, the stability parameters including construct stiffness, wedge displacement, and construct strength were tested under compressive forces and compared among the 4 groups. FINDINGS: No statistical difference was found in the construct stiffness among the 4 groups (P = 0.78). The type III fractures had the largest wedge displacement compared with the other 3 groups. The failure loads on average were significantly reduced in the type III fractures compared with those with intact hinge (P < 0.01) and in type I fractures (P = 0.04). No statistical difference was observed between the type I fractures and the intact hinge in terms of wedge displacement or failure loads. INTERPRETATION: The type III fractures were the most unstable and patients with these fractures should be managed cautiously. Delayed weightbearing and/or additional fixation should be considered.

Novel Rim Plating Technique for Treatment of the Inferior Pole Fracture of the Patella.

To aim of the present paper was to introduce a novel fixation technique for the treatment of inferior pole fracture of the patella. We performed a prospective observational study of consecutive cases of inferior pole fracture of the patella that were treated at our institution between January 2018 and June 2019. The patients include three men and one woman, with an average age of 47 years (range: 42-59 years). All patients were treated with the novel rim plating fixation technique for preserving the inferior pole of the patella. During the surgery, a 2.4 mm straight locking compression plate was contoured to adapt to the arc of the lower half of the patella as the rim plate. After reduction of the fracture, the rim plate was fixed to the proximal fragment of the patella through multiple locking screws, against the continuous pull of the patellar tendon. The rim plate encircles and constricts the inferior pole fragments, functioning as a compression and blocking construct. If necessary, an additional anterior tension band or mini locking plate can be used to further prevent anterior displacement of the inferior pole fragments. Under this rigid fixation, motion of the knee and full weight-bearing were encouraged postoperatively. The patients were followed up monthly until 12 months after surgery. The time to achieve 90°pain-free, full range of motion of the knee, and fracture healing, were recorded. Related complications were monitored, including infection, loss of reduction, fixation failure, anterior knee pain, and soft-tissue irritation. The modified Cincinnati knee rating system was used for knee function assessment. The average operative time was 58.8 min (range: 52-63 min). The average blood loss was 59.8 mL (range: 45-71 mL). For all patients, pain-free 90° range of motion was restored in 2-4 weeks, and the full range of motion was restored in 8-11 weeks. All patients achieved bone union in 6-9 weeks with no displacement of the fragments or breakage of the implant. No patient complained of anterior knee pain or soft-tissue irritation. The modified Cincinnati score at 12-month follow up demonstrated excellent outcomes in all four patients. The rim plating technique may be a feasible option for the treatment of the inferior pole fracture of the patella.

Patient expectations predict outcomes following distal radius fracture: a prospective cohort study using the TEFTOM questionnaire.

INTRODUCTION: The relationship between patient expectations and clinical outcomes has recently been of increasing interest in the field of orthopaedics. The objective of this study was to evaluate the relationships between (1) patient pre-treatment expectations and post-treatment clinical outcomes, and (2) fulfillment of expectations and patient satisfaction, following distal radius fracture. METHODS: This was a prospective multicenter cohort study conducted across three hospitals. A total of 133 patients admitted to hospital between 2016 and 2018 with a distal radius fracture were recruited. Patients were administered the Trauma Expectation Factor (TEF) at baseline to measure expectations of pain and functioning at one-year post-injury. Patients were followed up at 6 and 12 months post-injury and outcomes were measured using the Trauma Outcome Measure (TOM), Shortened Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaire, and Short-Form 12-item (SF-12) health survey. Fulfillment of expectations was measured as TEF score minus TOM score at each time point. Patient satisfaction was also measured using the Patient Satisfaction Questionnaire Short Form (PSQ-18). Multivariate regression models were created to evaluate the effect of expectations on outcomes. RESULTS: Patient expectations correlated moderately with outcomes at 6 and 12 months post-injury. In the multivariate analysis, patient expectations were predictive of better outcomes at 6 and 12 months. Injury severity, age, mechanism of injury, and whether the injury occurred on duty also contributed significantly to one or more regression models. Patient satisfaction correlated weakly with fulfillment of expectations at 6 months, but moderately with all outcome scores. At 12 months, satisfaction did not correlate significantly with expectations fulfillment but correlated moderately to highly with all outcome scores. CONCLUSION: Patient expectations independently predicted outcomes at 6 and 12 months post-injury. Standardized assessment and management of patient expectations may be relevant to future clinical practice and research to best quantify and optimize patient outcomes.

Biomechanical analysis of "Barrel hoop plate" technique for the posterolateral fragments of tibial plateau fractures with different displacement tendency.

OBJECTIVES: The purpose of our study is to evaluate the three-dimensional biomechanical properties of "Barrel Hoop plate" in two kinds of artificial posterolateral tibial plateau fracture fragment (PLF) by using of synthetic models, each of which has an initial amplifying displacement tendency. MATERIAL AND METHODS: Thirty-six tibiae models were randomly assigned into two groups with different displacement tendencies: posterior displacement (PD) and lateral displacement (LD). Each model was then fixed with three patterns: Anterolateral plate (AP), Posterolateral plate (PP), and "Barrel Hoop plate" (BHP). Displacement in three axes of vertical, sagittal and horizontal axis was captured by Optotrak Certus motion analysis system. Bluehill 2 software was used for load control and data collection. RESULTS: In Model-PD, when the load was over 1000 N, the posterior displacement of Group-PP and Group-BHP were less than Group-AP (P<0.01). The inferior displacement in the vertical axis of Group-PP was larger than both Group-AP and Group-BHP in all the loading set (P<0.01). In Model-LD, both of the lateral displacement in Group-AP and Group-BHP was less than that of Group-PP when the load was over 1000 N (P<0.01). The inferior displacement of Group-AP was less than that of Group-PP in the load of 1500 N (P<0.01). Both of the posterior displacement of Group-AP and Group-BHP was less than that of Group-PP when the loading was 1500 N (P<0.01). The stiffness of Group PP was less than that of Group AP (P<0.01). CONCLUSIONS: The results demonstrated that the 2.7 mm "Barrel Hoop plate" had a greater capacity of anti-three-dimension axes displacement of PLF. The 3.5 mm Anterolateral plate had the advantage in anti-lateral displacement and anti-inferior displacement but was weak at anti-posterior displacement of PLF. The 2.7 mm Posterolateral plate was stronger in anti-posterior, however, weak in anti-inferior displacement capacity.